0.3 - 10 microns
Optimal Particle Size
≈ 1 min/Layer
The MPL-1 unit is not your average 3D printer and is intended for industrial fabrication with a maximum build size of 250 cm3 Sub-micron resolution, Lowest porosity and, Highest density.
Of course, we know how difficult it is to find those specifications on any 3D printer, but currently, the MPL-1 unit is serving industries with minimal barriers to entry requiring metal fabrication and small build sizes.
The challenge for jewellers is to take manufacturing to the new era and use technology as a way to enhance their creativity without compromising in the quality of their creations.
Miniaturization is pushing manufactruing to its limits. We fill an unserved space where components like heat sinks & connectors are too big for lithography and too small for CNC machining.
From building screws to the whole dial, we aren't limited by size or complexity. We've been approached by some of the biggest brands to help them created unique and futuristic masterpieces.
For its maximum efficiency, the MPL-1 uses its own refillable, high-quality powder and chemicals.
They come in cartridges conceived in our laboratories, where our chemists use the exact and perfect balance of raw material and additives.
To this day, we have tested the most commonly used metal powders like Stainless Steel, Copper, Titanium and we are still pushing the limits of our 3D printer.
Although the MPL-1 is known for using nanoparticles, it isn't limited to that size. We also use micron ( μm ) sized powders in our 3D printers.
To fully understand why and how the MPL-1 is able to work with irregular powder shapes ranging from a few nanometers to the hundreds of microns, visit our White Paper section.